BeagleBoard BeagleBone AI-64 Скачать руководство пользователя страница 4

Preface

BEAGLEBONE AI-64 DESIGN

These design materials referred to in this document are 

NOT SUPPORTED

 and 

DO NOT

 constitute a

reference design. Only “community” support is allowed via resources at 

BeagleBoard.org forum

.

THERE IS NO WARRANTY FOR THE DESIGN MATERIALS, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS
AND/OR OTHER PARTIES PROVIDE THE DESIGN MATERIALS “AS IS” WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE
RISK AS TO THE QUALITY AND THE PERFORMANCE OF THE DESIGN MATERIALS IS WITH YOU.
SHOULD THE DESIGN MATERIALS PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIRING, OR CORRECTION.

This board was designed as an evaluation and development tool. It was not designed with any other
application in mind. As such, the design materials that are provided which include schematic, BOM,
and PCB files, may or may not be suitable for any other purposes. If used, the design material
becomes your responsibility as to whether or not it meets your specific needs or your specific
applications and may require changes to meet your requirements.

See the 

LICENSE

 file regarding the copyright of these materials. This LICENSE does 

not

 apply to

BeagleBoard.org Foundation trademarks.

BEAGLEBONE AI-64 ADDITIONAL TERMS

BeagleBoard.org Foundation and logo-licensed manufacturers provide the board under the
following conditions:

The user assumes all responsibility and liability for proper and safe handling of the goods. Further,
the user indemnifies the Supplier from all claims arising from the handling or use of the goods.

Should the board not meet the specifications indicated in the System Reference Manual, the board
may be returned within 90 days from the date of delivery to the distributor of purchase for a full
refund. THE FOREGOING LIMITED WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY SELLER
TO BUYER AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY,
INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER PARTY SHALL BE
LIABLE TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES.

Please read the System Reference Manual and, specifically, the Warnings and Restrictions notice in
the Systems Reference Manual prior to handling the product. This notice contains important safety
information about temperatures and voltages.

No license is granted under any patent right or other intellectual property right of Supplier
covering or relating to any machine, process, or combination in which such Supplier products or
services might be or are used. The Supplier currently deals with a variety of customers for

2

Содержание BeagleBone AI-64














































Отзывы: