background image

75.5695.07 IS40 IS40XL 20170313 

Page 1 of 9

1
2

7

8

6

4

3

5

IS40: for normal to high mounting 8 ft - 16 ft
IS40 XL: for low mounting 6.5 ft - 11.5 ft

Specifications are subject to changes without prior notice.

Measured in specific conditions

TECHNICAL SPECIFICATIONS

DESCRIPTION

ENGLISH

Motion and presense sensor for 

automatic industrial doors

1. 

push buttons

2. 

LED’s

3. 

infrared detection (AIR)

4. 

radar angle

5. 

radar detection

6. 

sensor angle indicator

7. 

bracket

8. 

cable

12V to 24V AC ±10%; 12V to 24V DC +10% / -3%
< 3.5 W
50 to 60 Hz 
2 relays (free of potential change-over contact)
42 V AC/DC
1 A (resistive)
30 W (DC) / 48 VA (AC) 
IS40: 8 ft - 16 ft; IS40 XL: 6.5ft - 11.5ft*
from -22 °F to + 140 °F
0 - 95% non condensing
IP65 / NEMA4
5 in (L) x 4 in (H) x 3.75 in (W)
ABS and polycarbonate
14 oz
32 ft / 9.7 m
R&TTE 1999/5/EC; EMC 2004/108/EC, R&TTE: 1999/5/EC

microwave doppler radar
24.150 GHz
0.5 s to 9 s
< 5 mW/cm²
motion
IS40:13ft x 16.5ft; IS40 XL:13ft x 6.5ft**

2 in/s
100 ms
-8° - 22° (relative to sensor front face)

Supply voltage:
Power consumption:
Mains frequency:
Output: 
   Max. contact voltage:
   Max. contact current:
   Max. switching power:
Mounting height:
Temperature range:
Humidity:
Degree of protection:
Dimensions:
Materials:
Weight:
Cable length:
Norm conformity:

Technology:
Transmitter frequency/wavelength: 
Output holdtime:
Transmitter power density:
Detection mode:
Detection field:

Min. detection speed:
Reaction time:
Tilt angle:

*      detertimes field size

**    measured at 30°, field size 9, mounting height: 16 ft,  XL: 11.5 ft

*** Zone detected with the Spotfinder, ie slightly larger than the effective 

       detection field

Other use of the device outside of its permitted purpose cannot be guaranteed 
by the manufacturer.
The manufacturer cannot be held responsible for incorrect installations or 
inappropriate adjustments of the sensor.

Please keep for further use

Designed for color printing

active infrared (AIR)
875 nm
0.5 s
< 250 mW/m²
presence
IS40:10ft x 10ft; ***
IS40XL:7.5ft x 7.5 ft ***
0 in/s to activate detection
250 ms
15° - 45°

IS40 

/

 IS40 XL 

Содержание IS40










Отзывы: