Page 1 of 6
75.0069 V4 [Rev 8/28/2002]
PRODUCT
DESCRIPTION
TECHNICAL
SPECIFICATIONS
COMPONENT ID
SAFETY
PRECAUTIONS
The Crystal Active Infrared presence detector (PN: 10CRYSTALPRE) is ideal for threshold safety and sidelite protection for
sliding doors, as well as threshold protection on the approach side of a swinging or bi-folding door. It is universally
compatible with any automatic door control, and is quick and easy to install. The Crystal technology utilizes multiplexing,
which assures that it is constantly scanning the background looking for any changes. Therefore, if the change in
background remains constant for a set time (adjustable 1 minute or 10 minutes), the sensor learns it and allows your door
to return to normal operation.
NOTE
:
The Crystal should not be used as a motion detector. The Crystal’s detection pattern does not meet
the minimum motion pattern requirements as stated by ANSI A156.10.
•
Shut off all power going to the header before attempting any wiring procedures.
•
Maintain a clean & safe environment when working in public areas.
•
Constantly be aware of pedestrian traffic around the door area.
•
Always stop pedestrian traffic through the doorway when performing testing that may result in unexpected reactions by
the door.
•
Always check placement of all wiring and components before powering up to insure that moving door parts will not
catch any wires and cause damage to equipment.
•
Ensure compliance with all applicable safety standards (i.e. ANSI A156.10) upon completion of installation.
TECHNICAL SPECIFICATIONS
Installation Height:
7’ to 10’
Detection Zone:
Wide pattern: 6’
Narrow pattern: 3’
Depth: 4”
Mounting Angle:
from 3° to 21°
Power Supply:
12 to 30 V DC ± 10%
12 to 24 V AC ± 10%
Consumption:
< 1 W (VA)
Output - Contact Ratings:
Max. voltage
Max. current
Max. switching power
Dry Contacts
60 V DC / 125 V AC
1 A (resistive)
30 W (DC) / 60 VA (AC)
Frequency:
50 to 60 Hz
Response Time:
< 50ms
Relay hold time:
1.5 seconds (fixed)
Auto Learn Time
1 or 10 minutes
Temperature range:
-30° to +131° F
Dimensions:
10” L x 2” H x 1.5” D
Weight: 7
oz.
Material:
Black ABS and polycarbonate
Length of Cable:
6’
USERS GUIDE
CRYSTAL
PRESENCE SENSOR
Cover
Supply
Cable
Emitting
lens
Receiving
lens
LED
DIP
Switches
Connector
Learn time
Angle
adjustment
OBSOLETE
