Version 0.1
3 July 2013
www.iHome.eu
Quick start:
Scene Controller EU
Technical specs
Normal operating voltage
2x AAA 1,5V batteries
Frequency range
868.42 MHz
Wireless Range
Up to 30 meters in line of sight
Basic operations
-
Switch lifestyles
-
Activate scenes
-
Easy control your lights and curtains together by one pushbutton
-
Long battery lifetime
-
Available with double press buttons
H
ow it operates
The
Scene Control
has 7 buttons.
If 1 of the 7 buttons is pressed a CENTRAL_SCENE_NOTIFICATION Z-Wave message is sent to the associated
node with the corresponding value. This message can trigger a scene in a controller.
Use
The
Scene Control
can be used to activate a scene or lifestyle.
Include into a Z-Wave network
1
1.
Press and hold the
Button 5 for
2 seconds and release to start the exclude process.
2.
When classic inclusion failed, the product will start Network Wide Inclusion automatically.
Exclude into a Z-Wave network
1.
Press and hold the
Button 5
for 12 seconds until the led starts blinking, than release to start the
exclude process, if you keep holding the button it will only send wakeup message.
2.
Make sure the
Scene Controller
is in direct range of the controller.
1
Make sure your Z-Wave controller is in the correct operation mode (include or exclude).
