BE Ag & Industrial AGRI EASE BE-LS22TL6505GC, Руководство пользователя, Страница: 30 / 40

Page 23
1. Start the engine as instructed in the Engine Operator’s manual included with the log splitter.
2. Place the log against the end plate and only split the wood in the direction of the grain.
See FIGURE 22.
3. To stabilize the log, place your left hand on the side of the log opposite the beam as shown in FIGURE 22 .
WARNING! Never place a hand on the ends of the log, between the log and the end plate or the log
and the splitting wedge.
WARNING! Only one operator permitted. The adult who loads and stabilizes the log, must be the
person who operates the control handle.
4. Move the control handle to the forward position to split the wood.
5. Remove left hand from the side of the log once wedge just contacts the log. Continue moving control handle forward
to split the log.
6. Release the control handle to stop the wedge movement.
7. Move the control handle to the reverse position to return the wedge.
8. Remove partially split wood from wedge.
1) Move the control handle to the REVERSE position until the wedge is fully retracted to allow split wood portion to
contact the log dislodger.
WARNING! Never remove partially split wood from the wedge with your hands. Fingers may become
trapped between the split wood.
2) Once removed from the wedge with the log dislodger, split the wood from the opposite end or in another location.
SPLITTING THE WOOD
OPERATION INSTRUCTIONS
(FIGURE22)
Right Hand
Left Hand
Page 26