BE Ag & Industrial AGRI EASE BE-LS22TL6505GC, Руководство пользователя, Страница: 19 / 40

Page 12
STEP 4:
Assemble the pump assembly to the engine. See FIGURE 8.
1. Loosen the set screw on the coupler at the engine side.
2. Place the engine shaft key into the slot on the engine shaft.
3
. Insert the engine shaft into the center hole of coupler, pivoting the pump assembly to ensure the engine shaft key to
fit in the slot of the coupler center hole. Then tighten the set screw just loosened.
4. Rotate the engine shaft to align the fixing holes on both pump mount and engine, and ensure the open side of the
pump mount facing down as shown in the illustration below, then screw on the hardware and tighten.
REF. NO. DECSRIPTION QTY.
8 Engine assembly (in engine box, not
shown), including:
1
8-1 Engine 1
8-2 Engine shaft key 1
9 Hardware Kit #4 (not shown) 1
Including: 1
9-1 Two stage pump assembly 1
9-2 Hex head bolt / 5/16-24 4
9-3 Spring washer / 5/16 4
9-4 Flat washer / 5/16 4
STEP 5: Attach the engine assembly to the engine mount plate on the reservoir assembly. See FIGURE 9.
(FIGURE 8)
(FIGURE 9)
Page 15