V.
Specifications
Digital Inputs:
Two – XLR
Digital Outputs:
Four – XLR
Analog Output:
Balanced L/R XLR + 4 dBm 600 Ohms – Rear Panel
Headphone out:
600 Ohm unbalanced - Front Panel
Sample Rate Range:
8 – 192 KHz, Auto Detect and Lock
D/A Converter Resolution:
Up to 24 bits
Remote Control:
Momentary ground closure selects channels and
reset to auto mode operation or RS-232/485 Serial
Remote Status:
Channel Select Open Collector Output
Remote Control Connectors:
DB9F throughout
Front Panel Controls:
7 - Momentary Push buttons - Switcher Selection,
Error Reset, Auto/Manual Mode Operation Select,
Volume Up/Down
Front Panel Indicators:
Sample Rate, Lock Loss, Error Flags,
Channel Status, Auto/Manual Mode
Power Requirements:
100 - 240 V.A.C. @ 0.25A; 50 – 60 Hz.
Operating Environment:
0 – 60 Degrees Celsius Non Condensing Atmosphere
Physical:
19”W X 8”D X 1.75”H Mounted via Standard E.I.A.
19” rack one rack unit occupied. Weight: 8 LBS
FCC Certification Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
8
