Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Centro & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2015, BDI
Made in Taiwan. 12.2.2015 V2
T1
4mm Hex Wrench
C5
Drawer Liner x 1
C1
Glass Panel x 1
C3
Front Panel x 1
C2
Back Panel x 1
C9
Right Leg x 1
C8
Left Leg x 1
C4
Desk Frame x 1
C7
Lower Trough x 1
C6
Upper Trough x 1
H1
1/4-20 x 15 mm Screw x 16
H8
1/4-20 x 61 mm Screw x 5
H9
Leveler Glide x 4
H10
Bumper x 4
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your
BDI products. Register today and you will be entered to win free a BINK
table from BDI. www.bdiusa.com/product-registration/
Placement and Maintenance
Centro™ Office furniture is designed for indoor use on level floors. Clean
glass with glass cleaner, and steel parts and wood veneer with a moist
cloth.
Your Centro™ Office furniture is engineered for easy assembly. Carefully
follow this procedure to prevent any damage.
Do not use power tools for assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly workspace
should be a non-marring surface such as carpet. For missing hardware
pieces, please contact BDI Customer Service at customerservice@
bdiusa.com. For all other concerns, please contact your BDI retailer.
bdiusa.com
CENTRO
TM
6401
DESK
