BD FocalPoint GS Скачать руководство пользователя страница 137

Страница: 137 / 242

Operating the BD FocalPoint™ Slide Profiler

137

15.1 General Warnings and Cautions

Observe the following general warnings and cautions while operating the BD FocalPoint™ Slide

Profiler. Other, more specific warnings and cautions appear throughout this section and

elsewhere in the manual.

WARNING

THE BD FOCALPOINT™ SLIDE PROFILER MUST BE

POSITIONED IN SUCH A MANNER THAT BOTH, THE POWER

SWITCH AND THE AC INPUT ARE EASILY ACCESSIBLE TO

THE OPERATOR AT ALL TIMES. UNPLUG THE SUPPLY CORD

FROM THE MAIN CIRCUIT TO DISCONNECT THE DEVICE.

WARNING

PROTECTION PROVIDED BY THIS EQUIPMENT MAY BE

IMPAIRED IF IT IS USED IN A MANNER NOT CONSISTENT

WITH THE INSTRUCTIONS IN THIS MANUAL.

WARNING

THE BD FOCALPOINT™ SLIDE PROFILER MUST BE

GROUNDED AT ALL TIMES. TO ENSURE THAT THE POWER

CORD AND OUTLET STRIP HAVE THE REQUIRED

ELECTRICAL CURRENT RATINGS, ONLY USE THE CORD AND

POWER STRIP SUPPLIED WITH THE UNIT, OR AS PROVIDED

BY BD.

WARNING

SHOCK AND FIRE POTENTIAL FROM SPILLED LIQUIDS. DO

NOT PLACE CONTAINERS WITH LIQUIDS ON THE DEVICE OR

THE WORKSTATION CART. DO NOT SPILL LIQUIDS ON THE

SYSTEM; FLUID SEEPAGE INTO INTERNAL COMPONENTS

CREATES A POTENTIAL SHOCK AND FIRE HAZARD. SHUT

DOWN THE DEVICE, DISCONNECT FROM THE POWER

SOURCE AND WIPE UP ALL SPILLS IMMEDIATELY. DO NOT

OPERATE THE SYSTEM IF INTERNAL COMPONENTS HAVE

BEEN EXPOSED TO FLUID.

Содержание FocalPoint GS



















































































































































































































































Результаты поиска

Содержание FocalPoint GS

Отзывы:

BD FocalPoint GS, Руководство пользователя, Страница: 137 / 242

Результаты поиска

Содержание FocalPoint GS

Отзывы: