BD BD FACSPresto, Инструкция по эксплуатации

Страница: 71 / 96

Chapter 6: Sample processing 71
Searching for test
results To search for test results:
1. Press Up or Down to scroll through the test results.
Filtering test
results You can filter test results by patient ID, date, or both. To filter test
results by both patient ID and date, perform both of the following
procedures.
To filter test results by patient ID:
1. Press the Patient ID field.
2. Enter the patient’s ID.
If you do not know the exact patient ID, use an asterisk (*).
For example, if you are searching for a patient ID that begins
with 123, enter: 123*. If you are searching for a patient ID
that ends with 123, enter: *123. If you are searching for a
patient ID that contains 123, enter: *123*.
3. Press Accept .
If you are also filtering by date, perform the following
procedure.
To filter test results by date:
If you are filtering by date only, the Patient ID field should contain
the default value of an asterisk (*) only.
1. Press the Start Date field.
2. Press Up or Down to select the start date for the filter.
3. Press Accept .
4. Press the End Date field.
5. Press Up or Down to select the end date for the filter.
6. Press Accept .
Printing test results You can print only one test result at a time.