SPECIFICATIONS:
•
Power Requirements
•
Voltage: 9 to 24 V.D.C.(+/-10%)
•
Current: 500 Ma (MAX)
•
Serial Transmission Output
•
ANSI Standards TIA/EIA-422-B Compliant
•
ANSI Standards TIA/EIA-485-A Compliant
•
Baud Rate: 19200
•
Data Bits: 8
•
Parity: None
•
Stop Bits: 1
•
Electrical Termination
•
Screw Type Pluggable Terminal Blocks
•
26-14 AWG Wire Size
•
Temperature Sensor Cable Length: 100FT (MAX)
•
Cable Entry
•
Cable O.D. Range: 0.230-0.530 inches
•
“Build Up” Rubber Tape provided to support interface cables as small as 0.10” O.D.
•
Mounting
•
Four 0.190” Diameter Mounting Holes
•
Hole to Hole Dimensions 4.53” Square
•
Temperature Sensor/s
•
Housing: 3/8” Round Aluminum x 1.25” Long
•
1 Built In & Up To 16 More Optional
•
Remote Sensor Cable Length: P/N Specific
•
Measurement Range: -55
°
C to +125
°
C
•
Accuracy -10
°
C to +85
°
C:
±
0.5
°
C
•
Accuracy -55
°
C to -10
°
C/+85
°
C to +125
°
C:
±
2
°
C
•
Resolution: 12 Bits (0.0625
°
C)
•
Base Unit Environmental
•
-40
°
F to +122
°
F, 100% humidity, condensing
(-40
°
C to +50
°
C, 100% humidity, condensing)
•
Enclosure Rating: IP66 (NEMA 4X)
•
Physical
•
Enclosure Dimensions
5.12” wide x 5.12” high x 2.95” deep (130mm wide x 130mm high x 75mm deep)
•
Weight: 1 LB (0.45 Kg)
•
Enclosure Color/Type: Light Gray/Polystyrene
•
Cable Gland Protrusion: 1.25” (31.75mm) Nominal
•
Approvals
•
The WTM1 has been designed to meet or exceed CE, UL, & CSA safety requirements
.
BCS Product Warranty
Bradshaw Communication Systems (BCS) products are warranted to be free from defects in material or workmanship for one
(1) year from the date of sale to the original purchaser. Any part of the product covered by this warranty that, with normal
installation and use, becomes defective will be repaired or replaced by BCS, at our option, provided the product is shipped
insured and prepaid to: BCS Service Department, 6272 Old Dahlonega Hwy. Murrayville, Georgia 30564, USA. The product
will be returned to you freight prepaid. This warranty does not extend to any BCS products that have been subjected to
abuse, misuse, improper storage, neglect, accident, improper installation or have been modified, repaired or altered in any
manner whatsoever, or where the serial number or date code has been removed or defaced. No employee, agent, dealer, or
other person is authorized to give any warranties on behalf of BCS.
The foregoing limited warranty is the BCS sole and exclusive warranty and the purchaser’s sole and exclusive remedy. BCS
makes no other warranties of any kind, either express or implied, and all implied warranties of merchantability or fitness for a
particular purpose are hereby disclaimed and excluded to the maximum extent of the law. BCS liability arising out of the
manufacture, sale or supplying of products or their use or disposition, whether based upon warranty, contract, tort or
otherwise, shall be limited to the repair or replacement of the product. In no event shall BCS be liable for special, incidental
or consequential damages (including, but not limited to, loss of profits, loss of data or loss of use damages) arising out of the
manufacture, sale or supplying of products, even if BCS has been advised of the possibility of such damages or losses.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary
from state to state.
Products that are out of warranty may also be repaired by the BCS Service Department. The parts and labor involved in out
of warranty and general repairs are warranted for 90 days when repaired by the BCS Service Department. All shipping
charges in addition to parts and labor charges will be at the owner's expense. All returns require a Return Authorization
Number that may be obtained by contacting the BCS Service Department prior to return of the product.
WTM1
WEATHERPROOF
TEMPERATURE MONITOR
INSTALLATION MANUAL
PART NUMBERS:
•
P/N 06-01000-1
WTM1 Weatherproof Temperature Monitor Main Unit w/ 1 Cable Entry Gland
•
P/N 06-02000-25
Optional WTM1 Remote Sensor w/ 25FT Interface Cable
•
P/N 06-02000-50
Optional WTM1 Remote Sensor w/ 50FT Interface Cable
•
P/N 06-02000-100
Optional WTM1 Remote Sensor w/ 100FT Interface Cable
BCS reserves the right to change specifications contained herein without notice.
(Release Date: 01JUN06)
READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLATION.
SAVE THIS INSTALLATION MANUAL FOR
FUTURE REFERENCE.
INSTALLATION SHOULD ONLY BE PERFORMED BY QUALIFIED
SERVICE PERSONNEL.
