BCN3D Sigma Series страница 9 Скачать руководство пользователя | Manualshive

Страница: 9 / 87

background image

User Manual

9

Complies with the essential requirements and any other applicable or required
provisions of the Directives:

2006/42/CEE

Machinery Directive

2014/35/UE

Low Voltage Directive

2014/30/UE

Electromagnetic Compatibility Directive (EMC

)

2011/65/UE

Restrictions on the use of hazardous substances in electrical and

electronic equipment (RoHS)

2009/125/CE

Ecodesign requirements for energy related products

2012/19/UE

Waste electrical and electronic equipment

2014/53/UE

The harmonisation of Member States’ legislation on the marketing of

radio equipment.

Conformity with the requirements of these directives is justified by the following
harmonised standards:

2006/42/CEE

UNE-EN ISO 12100:2012; UNE-EN ISO13732-1 :2008; EN ISO

7010:2012

2014/35/UE

UNE-EN 60204-1;UNE-EN 60947-3:2009

2014/30/UE

UNE-EN 55022:2011; UNE-EN 55024:2011; UNE-EN 61000-4-3-2:2007

This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.

The BARCELONA THREE DIMENSIONAL PRINTERS, S.L. hereby declares that the BCN3D Sigma:

Conformity

BARCELONA THREE DIMENSIONAL PRINTERS, S.L.
Carrer de Miquel Servet, 18, 08850 Gavà, Barcelona
Tel: +34 935 95 43 43

REI-RAEE: 6989

Changes / modifications not approved by the responsible party could void the user’s authority to operate the
equipment.

«
...
7
8
9
10
11
...
»

Содержание Sigma Series
























































































Отзывы:

Нет отзывов

Похожие инструкции для Sigma Series

Бренд: Datecs Страницы: 73

Бренд: Datamax Страницы: 12

E-Class Mark II

Бренд: Datamax Страницы: 40

Бренд: Datamax Страницы: 46

Бренд: Canon Страницы: 542

Invent3d Series

Бренд: Inventorcloud Страницы: 4

Бренд: YAEN Страницы: 4

Бренд: Star Страницы: 82

Бренд: DAKEWE Страницы: 94

Color Jetprinter 810 Series

Бренд: Lexmark Страницы: 2

VersaUV LEJ-640

Бренд: Roland Страницы: 321

Бренд: Xerox Страницы: 109

Бренд: Paradise POS Страницы: 275

Бренд: Magicard Страницы: 31

da Vinci 1.0 Pro

Бренд: XYZ Printing Страницы: 22

Бренд: 3DGence Страницы: 103

Бренд: Creality Страницы: 16

Бренд: Creality Страницы: 22

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды