BCDVideo BCD221, Руководство пользователя

Страница: 118 / 157

Cabling
Servers Storage Cabling Guidelines
When installing cables, observe the following:
• All ports are labeled:
◦ System board ports
◦ Controller ports
◦ 12G SAS Expander ports
• Most data cables have labels near each connector with destination port information.
• Some data cables are pre-bent. Do not unbend or manipulate the cables.
• Before connecting a cable to a port, lay the cable in place to verify the length of the cable.
• When routing cables from the front to the rear of the server, use the cable channels on either side of the
chassis.
Cabling diagrams
Use the following tables to find cabling information and diagrams. For additional cabling configurations, see
the HPE Information Library (
http://www.hpe.com/info/CablingMatrixGen10 ).
Table 1: SAS/SATA kits
Option kit Cable part
number* From To Power cable part
number
Front 2SFF SAS/SATA drive cage
(SFF) 869826-001
1
Drive
backplane
System board
SAS Expander
Controller
869810-001
6
869825-001
6
Front 2SFF SAS/SATA 1U drive
cage (LFF) 869826-001
1
Drive
backplane
System board
SAS Expander
Controller
869810-001
6
Front 8SFF SAS/SATA drive cages 776402-001
4
Drive
backplane
System board
SAS Expander
Controller
869825-001
6
Front 4LFF SAS/SATA drive cages 869827-001
1
Drive
backplane
System board
SAS Expander
Controller
869825-001
6
Mid 4LFF SAS/SATA drive cage 869824-001
2
Drive
backplane
System board
SAS Expander
Controller
869810-001
6
Table Continued
118 Cabling