BC Linll
Reference Card
@.�
Getting Started
Antenna
f-----
Smart Mic
connection cord
Red transmit light
---"-'
Green power light
----o-1
-'.b.
Earphone jack
Microphone
Power/
Volume
Channel
Privacy
code
Speaker
-
Push-to-talk
button
Pre-set
channels
Additional
screen
Smart Mic
liiiiiiii)
1-----USB port
Radio Base Unit
I
ii
•))
icons
Battery meter
Button sound
Locked channel
Roger beep
Charging the battery
Connect the base unit to a power outlet using the
included cable and USB power adapter. A full
recharging can take up to 4 hours.
Using the BC Link
a. Place the radio in your pack, feed the cord through
the shoulder strap, and clip the Smart Mic onto
shoulder or sternum strap.
b. Rotate the power knob clockwise/counter
clockwise to power on, raise volume, or power off.
c. To transmit, press and hold the push-to-talk button,
wait one second before speaking. Release when
finished speaking.
d. Lights on the Smart Mic: Solid red= transmitting,
solid green= receiving, flashing green= standby.
Selecting a Channel
a.
Channels
1
-
7
and
15
-
22
are
1
W
att and have better range than
channels 8-
1
4. Battery life is longer on channels 8-
1
4 which are
0
.
5
W
att, though the transmission range is shorter.
b.
Push Menu and use • and T buttons to scroll and select a
channel. Stop on the desired channel code and wait 3 seconds
until it stops flashing,
or press OK.
Pre-setting channels on Smart Mic
The radio comes with factory pre-set channels,
but you can customize them. Have your commonly
used channels set ahead of time to avoid going into
your pack to change channels on base unit.
a. Select a letter on the Pre-set channel knob.
b. Push Menu and use • and T buttons to scroll and
select a channel.
c. Stop on the desired channel code and wait 3 seconds
until it stops flashing, or press OK.
d. To set privacy code, push Menu button while
channel code is flashing, scroll to desired
channel and wait 3 seconds, or push OK button.
e. Select the next letter on the pre-set channel knob
and repeat.
Lock the keys
Hold down the Menu and OK button for
three seconds. Holding down those two
buttons will also unlock the keys.
