BC Biomedical PFC-3000 SERIES, Руководство пользователя, Страница: 32 / 90

U
SER
M
ANUAL
F
LOW
A
NALYZER
TM
Page 28 / 84
7.6 Numerical Display When you switch on the device Numerical 1 appears on the
display. Four measured values can be displayed on the display at
the same time. In the title bar you can see the current settings for
the gas type, standard, battery status, mains mode and USB
connection.
7.6.1 Specification for the
Numerical Display
(1) Numerical display number . Altogether there are four
different numerical displays, allowing a maximum of 16
values to be displayed.
(2) Trigger Indication. This icon indicates the detection of a
trigger at the actual ventilation cycle. The icon is
displayed for ½ second and indicates the start of a new
inspiration. If this icon does not appear the trigger
settings need to be adjusted (> 7.14 Setting the Trigger ).
As long as there is no trigger event
being detected, “
No
Trig
” information is shown in the reading field.
(3)
Baseflow. This symbol appears if the baseflow function
has been activated for volume measurement (> 7.14
Setting the Trigger ).
(4)
Gas type currently selected. Depending on what type of
gas is being measured, the device must be set
accordingly (> 7.13 Gas Type and Standard).
(5)
Standard . The values displayed will be calculated using
the selected standards. Choose from several common
gas standards (> 7.13 Gas Type and Standard).
1
3
4 5
6
7
9
12
10
11
13
14
8
2