Microseparator™ Coolant Systems Transport, Installation, & Initial Startup
M000005_A - V Twin Ultra Transport & Installation 5.2-EN TM
60/78
19.4.3
Electromagnetic Influence
The machine contains no communication devices or variable frequency
drive motor controllers (inverter).
19.5
Dimensions of the Machine
11.4 Chip Separator with Tank – Tall Drawing 6SATD001 at page
for dimension detail. The assembly can be positioned with the chip
discharge end facing the front or rear of the generator. The control panel
position is fixed on the assembly.
Note the following:
A:
Consult generator manufacturer for set-aside area to avoid
interference with generator service access doors
B:
Assembly is height adjustable.
C:
Customer supplied debris container
D:
Observe appropriate electrical codes and standards with respect
to obstruction of electrical enclosure doors.
Figure 41 - Chip Separator with Tank Tall Dimensions
A
B
A
C
C
D