Microseparator™ Coolant Systems Transport, Installation, & Initial Startup
M000005_A - V Twin Ultra Transport & Installation 5.2-EN TM
14/78
9
Transport
9.1
Overview
9.2
General Instructions for Transport
•
Neither Satisloh nor Bazell Technologies accept
any liability whatsoever for any damage caused
by improper transport.
•
The Control Panel contains sensitive
components. Avoid shock and vibrations during
transport.
Safety Instructions for Transport of the Machines
•
Caution, the centrifuge is relatively top-heavy.
Risk of Tipping Over! Use caution. Attach
safety straps to the upper eyebolts on the
centrifuge and secure on the forklift mast before
lifting.
9.3
Transport by Crane
•
If unavoidable, the machine can also be
transported by crane.
•
Lift using appropriate straps attached to the
machine eye bolts as shown in the photo above.
•
Use only suitable technically satisfactory lifting
equipment with an adequate load bearing
capacity.
•
Stay away from the danger area below
suspended loads.
•
Only allow experienced personnel to secure the
loads and direct the crane driver. This person
must stay in the visual range of and in verbal
communication with the driver.
•
Make sure that nobody is within range of the
fork lift or the load.
Attention!
Warning!
Warning!