Bayer HealthCare MEDRAD MRXperion, Руководство по эксплуатации, Страница: 74 / 126

12 - 64 MEDRAD® MRXperion
NOTE:
If the injection is aborted, all remaining reminders are ignored.
NOTE:
Elapsed time continues during a Hold phase.
NOTE:
A blinking Pause symbol will appear on the Pressure Graph and the Injector icon will blink during either an
Operator Initiated Hold or a Programmed Hold.
12.7 Reminders
A Reminder dialog will display after the programmed time for the Reminder has elapsed.
NOTE:
If a Test Inject phase is performed, the reminder elapsed time begins with the start of the first phase after
the Test Inject. After the test injection, the system holds the injection until the operator presses
Start/Hold
on the injector head.
NOTE:
If a reminder is set, the operator is provided a communication once the elapsed time equals the reminder.
The reminder dialog disappears from the screen when the operator acknowledges the communication or
the next reminder dialog is activated.
1.
Press OK to close the reminder dialog.
Figure 12 - 6: Reminder Dialog
7
Indicators of Start of
Phase
Shows the start of each phase.
8 Injection Information Displays the current phase information during the injection.
9 KVO Button
Illuminated blue to indicate when KVO is activated. Press at any time during the
injection to end KVO.