Bayer HealthCare CLINITEK 50, Руководство пользователя, Страница: 21 / 39

17
1
Clean the test strip table and
check the white bar at the end
of each day or after testing 50
strips, whichever is more often.
Follow the directions for “Daily
Cleaning,” given on page 18.
2
Be sure the test table is empty.
Then gently push the table about
halfway into the instrument.
3
The instrument can be left
on when it is not being used.
However, if you are using the
battery pack, turn the instrument
off to save battery power.
When You Are
Finished Testing
You will be prompted to
clean the table after every 50
strips. Press CONT to return to
the READY FOR TEST screen.
The instrument does not
detect when the internal printer
is out of paper. However, a pink
edge will appear on the last
several feet of paper. Change
the roll shortly after you see this.
Operating Notes
If you never erase the memory
or reset the sequence number,
the number will continue to
increase until 999 is reached.
The next number will then be 001.
If the battery pack is
installed, a unique tone will
sound after 15 minutes of
nonuse to remind you to turn
the instrument off. It will repeat
in 5 minutes, then again
every minute.
✏
✏