Bayer HealthCare Certegra Скачать руководство пользователя страница 75

Страница: 75 / 104

Cleaning and Maintenance

15 - 67

ping) for a minimum of 1 minute and until visibly clean. Replace wipe if wipe becomes visibly
soiled. During the 1 minute cleaning time, make certain that all seams, recessed areas and
buttons are clean. Refer to

"Cleaning the Pistons and Syringe Interface"

to clean the syringe

pistons and syringe interface.

Thoroughly dry the injector head using a dry, clean, soft, non-linting wipe.

Wipe all external surfaces with the exception of the syringe pistons and syringe interface

(refer to Figure 15 - 3: Piston) with Sani-Cloth

Plus or CaviWipes™ for 1 minute or until vis-

ibly clean. Make certain that all seams, recessed areas, and buttons are clean. Refer to

"Cleaning the Pistons and Syringe Interface"

to clean the syringe pistons and syringe inter-

face.

NOTE:

If in a country where Sani-Cloth

Plus or CaviWipes™ are not available, and using an

equivalent cleaning agent (refer to the materials listed above), follow the same instructions
specified in step 4.

Allow the injector head to thoroughly air dry.

Inspect the injector head to ensure all surfaces are clean.

If any visible contrast media or other debris is evident, repeat cleaning instructions steps 2
through 6 until no visible soil is detected.

15.2 Daily and In the Case of Visible Contamination

NOTE:

To clean the syringe pistons or syringe interface, refer to

"Cleaning the Pistons and Syringe

Interface"

for instructions.

15.2.1 Cleaning the Injector Head

Figure 15 - 2: Injector Head

Electro-Mechanical Hazard - Equipment damage may result.

•

Do not use cleaning agents containing quaternary ammonium compounds (e.g. dimethyl

ethylbenzyl ammonium chloride), such as Sani-Cloth

Plus, CaviWipes™, ZEP

brand

cleaners, and/or ethyl alcohol, such as Lysol

and Clorox

on the syringe pistons or

syringe interface.

NOTICE

Содержание Certegra









































































































Результаты поиска

Содержание Certegra

Отзывы:

Похожие инструкции для Certegra

Бренды по названию

Популярные бренды

Bayer HealthCare Certegra, Руководство по эксплуатации

Результаты поиска

Содержание Certegra

Отзывы:

Похожие инструкции для Certegra

Бренды по названию

Популярные бренды