1. Lens
2. IR LED
(Night vision function)
3. Network LED Indicator
4. Power LED indicator
5. Built-in Microphone
6. Speaker inside
7. PIR Sensor (Optional)
1
2
3
7
5
4
1. Package Contents
Camera / Mounting Bracket / AC Power Adapter
/ Mounting Screws / Quick Installation Guide
2. Physical Descriptions
HD IP Camera
3. Network Requirements
- An ADSL modem with Internet connection.
- A broadband router, preferably with Wi-Fi
capability. Please make sure DHCP is enabled
on your router.
Wi-Fi
P/N:2IGOK20H0111
4. Install the hardware and connect with PC
Before connect camera to the Internet, please
check if your router has a WPS button, and then
follow the WPS setup. If not (or unsure), please
follow the wire setup.
A. Wired setup
a. Connect a network cable to the network port,
which is on the back of Camera and a LAN
port of the router.
b. Then plug the power adapter of Camera to
power on the camera.
C. Viewing camera video image through I.E.
Browser
K20H Series
Front View
Side View
13. Audio jack (Optional)
14. Micro SD Card Slot
13
14
8. Camera UID (Optional)
9. RJ-45 Network port
10. WPS button
11. DC5V-IN Socket
12. Reset button
b. Click Computer
c. Click network icon, then double click the UCAM
(xx.xx.xx.xx.xx.xx)(xx.xx.xx.xx),
Windows will automatically open the browser
(please select IE browser).
5VDC Power
Ethernet Cable
ADSL Router
Push WPS button
on the router and camera
ADSL Router
5VDC Power
b. Press the WPS button (on the lower back of
Camera) for 4 seconds until its LED blinks.
Then press the WPS button on your router and
wait for the Wi-Fi connection to be established
(within 10 to 120 seconds).
B. Wireless setup via WPS
Note
：
Please unplug the network cable for
Camera WPS setup.
a. Plug the power adapter and power on your
Camera then wait for 40 seconds to boot the
camera (operating system).
Quick Installation Guide
Back View
8
9
11
12
10
a. In order to successfully install the camera,
make sure you have these followings:
- DHCP is enabled on your Wi-Fi router.
- Please link to the below hyperlink to download
and Install the Plug-in file in your PC.
(http://www.ucamsee.com/webe/html/news/02.
php?num=33&page=1&kind=8)
- Make sure your camera and PC in the same
network segment.
6
Baycom
K20H(K20,K20S,K20K)
