manualshive.com logo in svg

Bay Networks Remote Annex 4000, Руководство по установке оборудования, Страница: 19 / 162

Поделиться
Скачать
Bay Networks Remote Annex 4000 Скачать руководство пользователя страница 19

xix

Remote Annex 4000 Hardware Installation Guide

Technical Support and Online Services

Bay Networks Information Services

Bay Networks Information Services provide up-to-date support
information as a first-line resource for network administration,
expansion, and maintenance. This information is available from a
variety of sources.

World Wide Web

The Bay Networks Customer Support Web Server offers a diverse
library of technical documents, software agents, and other
important technical information to Bay Networks customers and
partners.

A special benefit for contracted customers and resellers is the ability
to access the Web Server to perform Case Management. This feature
enables your support staff to interact directly with the network
experts in our worldwide Technical Response Centers. A registered
contact with a valid Site ID can:

❑

View a listing of support cases and determine the current
status of any open case. Case history data includes severity
designation, and telephone, e-mail, or other logs
associated with the case.

❑

Customize the listing of cases according to a variety of
criteria, including date, severity, status, and case ID.

❑

Log notes to existing open cases.

❑

Create new cases for rapid, efficient handling of
noncritical network situations.

❑

Communicate directly via e-mail with the specific
technical resources assigned to your case.

The Bay Networks URL is http://www.baynetworks.com. Customer
Service is a menu item on that home page.

Содержание Remote Annex 4000



































































































































































Отзывы:

Нет отзывов