Bay Networks 8000 RAC, Инструкция по установке, Страница: 67 / 148

2-23
Chapter 2 Installing the Model 8000 Remote Access Concentrator
Installing the Model 8000 Remote Access Concentrator
Booting Using BFS
To boot the RAC using the block file server (BFS):
1. Initialize the IP address parameters using either the
autoinitialize or manual initialize method.
The autoinitialization method is described in Autoinitializing
the IP Address Parameters on page 2-19 . The manual
initialization method is described in Manually Initializing the
IP Address Parameters on page 2-22 .
2. Enter the boot command.
If you do not enter a file name with the command, you are
prompted for one (the default file name is displayed at the
prompt: oper.64.enet). Press Return to boot using the default file
name.
The following example shows a typical screen display for a BFS
boot using erpcd on UNIX or Windows NT:
Enter boot file name[oper.64.enet]::
Requesting boot file ”oper.64.enet”.
Unanswered requests shown as ’?’,transmission errors
as ’*’.
Requesting boot from 192.9.200.88 via Ethernet...
Booting BFS file using open delay of 8
Booting BFS file from 192.9.200.88
Header received OK. Received data blocks shown as ’.’.
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . .. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . .. . . . . . . . . . . ? . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . * . . . . .
. . . . . . . . . . . . . . . . . . . . . . . * . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . ? . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EOF