STEP 1
STEP 3
BECKER F/T DAYBED
BECKER Q/T DAYBED
Please do not tighten the hardware until the entire assembly is completed.
Begin assembly by attaching each Leg (6) to the bottom of the
Side Panel (2) & (3) securing with 2 Allen Bolt (B) per panel using
L-key (I).
STEP 2
Attach the Front Rail (4) and Back Rail (5) to the Side Panel (2) & (3)
by aligning holes and securing with 2 Allen Bolts (A) per each end using
L-key (J). (DO NOT FULLY TIGHTEN BOLTS FOR THIS STEP)
Attach the Back Rest (1) to each Side Panel (2) & (3) by aligning the
hole and securing with 2 Allen Bolts (C), 2 Spring Washer (D), 2 Flat
Washer (E) per each end using L-key (I) as picture below.
(DO NOT FULLY TIGHTEN BOLTS FOR THIS STEP)
STEP 4
Secure 2 Support Leg (9) to the Center Support (8) as shown on step 4.1.
Tighten the Support Leg (9) clockwise until secure. Insert the pre-set
metal on Center Support (8) to the metal bracket on each side of Side
Panel (2) & (3) as step 4.2. Then securing the metal bracket as shown in
step 4.3 with 1 Screw (H) each side using Phillips Head Screwdriver
(NOT INCLUDED)
NO
PART LIST
QTY
BACK REST
1PC
SIDE PANEL
(L)
FRONT
SIDE RAIL
LEG
ITEM
HARDWARE
QTY
JCBB SCREW
M8 x 20MM
L - KEY
M5 x 65MM
1PC
1PC
4PCS
20PCS
4PCS
1
2
3
4
5
6
SIDE PANEL
(R)
7
1PC
8
SLAT
2 SET
JCBC SCREW
M6 x 35MM
SPRING WASHER
FLAT WASHER
(BIG)
FLAT WASHER
(SMALL)
L - KEY
M4 x 100MM
SCREW
M4 x 32MM
SCREW
M4 x 16MM
4PCS
12PCS
24PCS
16PCS
22PCS
1PC
1PC
A
B
16PCS
JCBC SCREW
M6 x 50MM
C
D
E
F
G
H
I
J
K
9
7pcs
2PCS
2PCS
BACK
SIDE RAIL
1PC
1PC
CENTER
SUPPORT
SUPPORT
LEG
STOPPER
10
11
12
13
14
15
1PC
1PC
TRUNDLE
FRONT RAIL
TRUNDLE
BACK RAIL
TRUNDLE
SIDE RAIL
2PCS
TRUNDLE
SLAT
5pcs
2 SET
TRUNDLE
SUPPORT
3PCS
6PCS
CASTOR
L
I
6
B
3
R
2
3
2
4
5
A
J
I
C
D
E
3
1
2
4
5
STEP 4.2
STEP 4.3
8
H
STEP 4.1
8
9
3
1
2
4
5
