baxter ExactaMix 2400 Compounder, Руководство оператора

Страница: 102 / 225

Using the Compounder
Operator Manual for the Baxter ExactaMix 2400 Compounder
Page 94 53007410 Rev. C
Replacing a Source Container
If you are fulfilling a series of orders, an ingredient may become depleted and need to be
replaced. When a formula is loaded and requires more ingredient volume than what remains in
the source container, the vertical bar on the ingredient button flashes. You can replace the
container now or start compounding. If you start compounding, the Swap Container window
appears when the source container is almost empty.
Swap Container window
1. Check that the source container is appropriately depleted.
WARNING
If there is a large amount of fluid remaining in the source container, or if the
container has emptied completely and forced air into the inlet, there may be
a delivery problem. For assistance with troubleshooting, contact Baxter
Technical Services. Refer to Getting Help on Page 22.
2. At the Swap Container window, tap one of these options:
•
Tap Swap is complete to replace the empty container with an exact match (same
ingredient, container size, container type and manufacturer). Use aseptic technique
to replace the source container.
• Tap
Use a different container
to replace the empty container with the same
ingredient from a different container size, container type or manufacturer. Use
aseptic technique to replace the source container.