baxter 2L3107 Скачать руководство пользователя страница 17

Страница: 17 / 194

Ipump Pain Management System Operator’s Manual

1-3

CD07-19-E4-766

Security

For patient security, the pump may be configured to require the:

Insertion of a key in the cover lock (KEY ONLY)

Entry of a security code before programming or changing the prescription (CODE ONLY)

Both key insertion and code entry (KEY+CODE) – the factory default configuration

Note:

If the pump is configured to require only the entry of a security code, the cover that holds the IV bag is optional.

Note:

Use of security features, such as KEY+CODE, should be governed by individual care site policies and regulations regard-

ing the use of controlled substances.

Organization of This Manual

This manual is designed for use by trained health care professionals.

! WARNING !

This manual is intended for clinicians only. Do not permit patients to have access to this manual.
Do not disclose the pump's security codes to patients.

Oct02_0719E4766.book Page 3 Friday, August 3, 2007 1:46 PM

Содержание 2L3107



































































































































































































Результаты поиска

Содержание 2L3107

Отзывы:

baxter 2L3107, Руководство оператора, Страница: 17 / 194

Результаты поиска

Содержание 2L3107

Отзывы: