baxter 2L3107 Скачать руководство пользователя страница 121

Страница: 121 / 194

Ipump Pain Management System Operator’s Manual

5-49

CD07-19-E4-766

History Not Available Message

If the pump displays

HISTORY NOT AVAILABLE

when the

History

key is pressed, the history may have

been erased if:

A new prescription was entered, but not yet started, for a PCA, Basal+PCA, or Continuous mode
infusion.

The pump’s configuration was modified.

Optional History Printout

The therapy history data can be printed using an optional printer and printer adapter. Some information, such
as changes made to prescription values, can only be viewed in a printout. Contact your local Baxter Service
Center for details.

Note:

DO NOT connect the printer adapter and printer to the pump while the pump is infusing.

Note:

Make sure the printer adapter contains fresh batteries to ensure optimal communications between the pump and the

printer.

Oct02_0719E4766.book Page 49 Friday, August 3, 2007 1:46 PM

Содержание 2L3107



































































































































































































Результаты поиска

Содержание 2L3107

Отзывы:

baxter 2L3107, Руководство оператора, Страница: 121 / 194

Результаты поиска

Содержание 2L3107

Отзывы: