Baxi SPC SPLIT, Инструкция по установке и обслуживанию

Страница: 63 / 80

For more information, see
List of parameters, page 62
9.2.2 Setting the time
1. Press the key to set the time.
The hours start flashing.
2. Set the hours and minutes by pressing the or keys.
3. Confirm the hours and minutes by pressing the key.
9.2.3 Programming the operating ranges
The operating ranges of the thermodynamic water heater define the
periods when the water heater is to produce domestic hot water.
Two operating ranges are available: Timer 1 and Timer 2, they are set in
the same way, one after the other.
1. Select Timer 1 - On by pressing three times on the key.
2. Set the hours and minutes of the start time of the operating range by
pressing the or key.
3. Confirm the start of the operating range by pressing the key.
4. Set the hours and minutes of the end time of the operating range by
pressing the or key.
5. Confirm the end of the operating range by pressing the key.
6. Confirm the first operating range by pressing the key.
7. Select the second operating range by pressing the key, if
necessary.
8. Repeat steps 2 to 6 to set the second operating range.
9. Confirm the second operating range by pressing the key.
9.2.4 Setting the domestic hot water temperature setpoint
The domestic hot water setpoint is set with the and keys.
1. Press the key to increase the setpoint or press the key to
reduce it.
The setpoint value flashes.
2. Confirm by pressing the key.
For more information, see
List of parameters, page 62
Fig.64
MW
-4
0
0
0
1
6
8
-3
Opt Mode Hybrid Mode
Fig.65
MW
-4
0
0
0
1
7
2
-4
Opt Mode Hybrid Mode
Fig.66
MW
-4
0
0
0
1
7
6
-3
Opt Mode Hybrid Mode
Fig.67
MW
-4
0
0
0
1
7
7
-4
Opt Mode Hybrid Mode
9 Settings
7740321 - v04 - 03122019 SPC Split 63