Baxi POWER HT+ 1.110 Скачать руководство пользователя страница 34

Страница: 34 / 44

8 Troubleshooting

8.1 Error codes

A Error code

B Secondary error code

C Description of the error

Note

Press the

key to return to the main display.

The symbol continues to be displayed on the control panel.

If the error is not resolved after one minute, the error code is

displayed on the control panel a second time.

Tab.19 List of error codes

Display

Description of the error

10:Outside sensor

Outside temperature sensor.

50:HW sensor 1

Domestic hot water sensor (only for heating only models with

domestic hot water tank).

110

110:Lockout SLT

Safety thermostat cut-off for overheating (pump blocked or

air in the heating circuit).

111

111:Shutdown limit thermost

Safety thermostat cut-off for overheating.

133

133:Safety time exceeded

Ignition error (4 attempts).

Note

Contact the installer:

If an error code different from the ones described is displayed

on the screen

If an error code is displayed on a regular basis

Note

If the error code simultaneously displays the and symbols,

contact the accredited technical assistance service.

Code E110

The code E110 is displayed when overheating occurs due to a breach in

the insulation:

Remove the heat exchanger.

Replace the insulation behind the burner bracket.

Replace the safety thermofuse behind the heat exchanger.

8.1.1 Automatic error code clearing

If the symbol is displayed at the same time as the error code, the error

code is automatically cleared when the cause that prompted it stops.
A flow or return temperature in excess of the critical value prompts an er

ror code. The error code is automatically cleared when the temperature

drops below the critical value.

8.1.2 Clearing error codes

If the probable cause of an error code is resolved but the error code con

tinues to be displayed, proceed as follows to clear the error code:

1. Press the button.

The command Reset? Yes is displayed on the control panel.

2. Confirm by pressing the button.

The error code disappears after a few seconds.

Fig.43 Error code

Error

118: Water pressure too low

0,4 bar

BM-0000026-GB-03

8 Troubleshooting

POWER HT +

7609475 - v04 - 15072015

Содержание POWER HT+ 1.110













































Результаты поиска

Содержание POWER HT+ 1.110

Отзывы:

Похожие инструкции для POWER HT+ 1.110

Бренды по названию

Популярные бренды

Baxi POWER HT+ 1.110, Руководство пользователя

Результаты поиска

Содержание POWER HT+ 1.110

Отзывы:

Похожие инструкции для POWER HT+ 1.110

Бренды по названию

Популярные бренды