Baxi 750M Heat Engine Скачать руководство пользователя | Manualshive

Страница: 4 / 27

background image

1. SAFETY

Installer

Before continuing any further with the installation of this appliance please read the
following guide to manual handling

!

The lifting weight of this heat engine and convection box is 7.4 kg.

!

One person should be sufficient to lift the fire. If for any reason this weight is
considered too heavy then obtain assistance.

!

When lifting always keep your back straight. Bend your legs and not your back.

!

Avoid twisting at the waist. It is better to reposition your feet.

!

Avoid upper body/top heavy bending. Do not lean forward or sideways whilst
handling the fire.

!

Always grip with the palm of the hand. Do not use the tips of fingers for support.

!

Always keep the fire as close to the body as possible. This will minimise the
cantilever action.

!

Use gloves to provide additional grip.

!

Always use assistance if required.

2. APPLIANCE DATA

This product uses fuel effect pieces and a burner compartment rear wall
containing Refractory Ceramic Fibres (RCF), which are man-made vitreous
silicate fibres. Excessive exposure to these materials may cause irritation to eyes,
skin and respiratory tract. Consequently, it is important to take care when
handling these articles to ensure that the release of dust is kept to a minimum. To
ensure that the release of fibres from these RCF articles is kept to a minimum,
during installation and servicing we recommend that you use a HEPA filtered
vacuum to remove any dust and soot accumulated in and around the fire before
and after working on the fire. When replacing these articles we recommend that
the replaced items are not broken up, but are sealed within a heavy duty polythene
bag, clearly labelled as RCF waste. This is not classified as “hazardous waste” and
may be disposed of at a tipping site licensed for the disposal of industrial waste.
Protective clothing is not required when handling these articles, but we recommend
you follow the normal hygiene rules of not smoking, eating or drinking in the work
area and always wash your hands before eating or drinking.
This appliance does not contain any component manufactured from asbestos or
asbestos related products.

Page 4

INSTALLER GUIDE

«
...
2
3
4
5
6
...
»

Содержание 750M Heat Engine




























Отзывы:

Нет отзывов

Похожие инструкции для 750M Heat Engine

Бренд: Valor Fires Страницы: 56

Бренд: Valor Fires Страницы: 56

Бренд: Valor Страницы: 72

Бренд: Valor Страницы: 38

Бренд: baltur Страницы: 76

Бренд: Endless Summer Страницы: 24

Siena Fire SNA20

Бренд: Dimplex Страницы: 3

Бренд: Napoleon Страницы: 148

Бренд: Dik Geurts Страницы: 92

Бренд: tepro Страницы: 19

WM -FM L-26-3223-STL

Бренд: Sierra Flame Страницы: 23

Бренд: IHP Страницы: 4

Бренд: VISION FUTURA Страницы: 16

Бренд: J. A. Roby Страницы: 79

Бренд: Robinson Willey Страницы: 10

Бренд: ROBENS Страницы: 16

Бренд: Masport Страницы: 20

BALTIMORE MONACO NAPLES

Бренд: Masport Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды