
Fitting the Distinction Fascia.
1.
Fit the fascia and secure using the thumbscrews
removed previously.
Fitting the Fuel support (All models).
1.
Locate the fuel support as in figure 7.
2.
Place the coals on top of the fuel support. It is not
necessary to use all the coals supplied.
Important notes.
!
The coal pieces supplied are a natural material.
Occasionally it will be necessary to reduce the size of
the coal pieces. To do this place them inside a plastic
bag, place on a suitable hard surface and tap gently
with a small hammer or similar tool.
!
The coals are for decorative purposes only.
There is a choke risk to young children. Make sure they cannot gain access to
them.
USING THE HEATER
Important Safety
Never cover the heater or obstruct the openings at the base of the heater, this could
cause overheating and consequent risk of fire.
What are the three switches for?
The heater is operated by three switches located below the hood on the left hand side of
the heater.
Switch 1 =
O
Main On - Off
In the On position only the fuel effect operates
Switch 2 =
I
1kW fan heat setting and fuel effect
Switch 3 =
II
2kW fan heat setting and fuel effect
The switches are connected on the inside, so when switch 1 is turned off, all switches
turn off.
Page 10
INSTALLER AND OWNER GUIDE
©
Baxi Heating U.K. Limited 2006.
Figure 7. Fuel support locations
(Fascia may differ from that
shown)