with a clear finish. Due to the indeterminate life span and ease of replacement, they are
specifically excluded from the guarantee.
To replace the light bulb.
!
We recommend that the floor is protected with a suitable covering to prevent
staining or discolouration by the coals.
!
Open the doors by pulling on the
handle.
!
Remove all of the loose coal
pieces from the top and front of the
fuel support. Be careful not to place
the coal pieces onto decorative
surfaces as they may cause staining
or discolouration.
!
Remove the three screws on the
front of the fuel basket. Behind the
basket is a black metal strip which
holds the fuel effect in place. Remove
this by lifting up (See figure 6).
!
Move the fuel bed forward and
upward out of the way; you will have to
hold the fuel effect up whilst replacing
the light bulbs. It may be helpful to get
another person to do this for you.
!
Remove the faulty bulb by screwing
the bulb anti - clockwise (See figure 7).
Fit the new bulb.
!
Fit the new bulb by screwing it
clockwise (See figure 7).
!
Relocate the fuel effect.
!
Relocate the black metal strip. The
folded edge should be on the bottom.
!
Secure using the three screws
removed previously.
!
Place the loose coal pieces on top and in front of the plastic fuel support.
Page 9
INSTALLER AND OWNER GUIDE
©
Baxi Heating U.K. Limited 2006.
Figure 7. Bulb replacement
Figure 6. Removing the black metal strip