14.2.1 Patient data
Figure 32:
Patient set active (handheld)
Figure 33:
Patient set active (iPad)
Create a new patient (chapter 13.2) and/or activate a patient (chapter 14.2). The patient's
name is transferred to the handheld
(Figure 32)
. Check if the patient’s data is correct.
The currently active patient is always displayed in the upper left corner of the iPad
screen
(Figure 33)
. If no name is displayed, no patient is activated.
The occlusion test can now be performed.
NOTE
The patient data is used to assign a recording to a patient and is stored together
•
with the recorded data. Only after activating a patient, the handheld is ready to
start a recording.
44
Содержание OccluSense
Страница 3: ...Instructions for Use ...
Страница 5: ...3 ...
