Baumuller b maXX BMC-M-SAF-02, Руководство по эксплуатации

Страница: 97 / 120

97
of 118
Operation Manual b maXX safe PLC BMC-M-SAF-02
Document no.: 5.07020.04
18
D
ISPOSAL
This chapter describes the proper and safe disposal of the b maXX safe PLC module. For
the most part, it can be classified as electronic scrap.
m
Prerequisite: The disassembly process has already been carried out, see
Z
Disassembly, storage
–
from page 93 onward.
18.1 Safety regulation
The disposal may only be conducted in compliance with the safety regulations. Observe
special local regulations as well, if applicable. If you are not able to conduct the disposal
yourself, hire a suitable waste removal company to do so.
18.2 Requirements for the personnel carrying out the work
The personnel you assign to conduct the disposal/disassembly must have the knowledge
and training required to carry out this work properly. The personnel selected must under-
stand and apply the safety instructions on the b maXX System and its components.
18.3 Disposal instructions
Prerequisites
m
The b maXX safe PLC module has already been disassembled properly.
m
All of the tools and equipment necessary for the disassembly are available and in good
working order.
Sheet steel Parts of the module are made of galvanized sheet steel. Sheet steel must be put into the
cycle of potential recyclables for ferrous metals.
Electronic scrap Electronic scrap (circuit boards), which cannot be disassembled further must be disposed
of as special waste. Observe the applicable regulations in doing so.
Plastic The housing is made of plastic. Plastic must be put into the cycle of potential recyclables
for plastics.