Baumuller b maxx BM4400, Инструкция по эксплуатации

Страница: 194 / 360

Wiring diagrams
Instruction handbook b maXX BM4400, BM4600, BM4700
Document No.: 5.12008.07 Baumüller Nürnberg GmbH
194
of 358
7.10
Notes on the usage of an OSSD test pulse see Z C.4 Requirements on an OSSD test
pulse – on page 349.
Notes on the usage of an OSSD test pulse see Z C.4 Requirements on an OSSD test
pulse – on page 349.
7.10.4 Requirements for the screwing
X101 (SELV/PELV) Max. cross-section
of connection
Connection
technology
Load capacity
Brake BM4412
BM4413
BM442X 1.5 mm
2
Plug-in contact X101-1 bis X101-4:
min.
0.1 A, max. 0.5 A
BM4414
BM443X
BM463X 1.5 mm
2
Plug-in contact X101-1 bis X101-4:
min.
0.1 A, max. 1.0 A
BM444X
BM464X 1.5 mm
2
Plug-in contact X101-1 bis X101-4:
min.
0.1 A, max. 4.0 A
BM445X
BM446X
BM447X
BM465X
BM466X
BM47XX 1.5 mm
2
Plug-in contact X101-1 bis X101-4:
min.
0.1 A, max. 8.0 A
if you consider UL508C:
max.
4.0 A
X102 (option)

Safety relay
Max. cross-section
of connection
Connection
technology
Load capacity /
voltage level
(SELV/PELV) 1.5 mm
2
Plug-in contact see

Z C.5 Technical data safety
relay module – on page 350
X103 (0ption)

Safety relay
Max. cross-section
of connection
Connection
technology
Load capacity /
voltage level
(SELV/PELV) 1.5 mm
2
Plug-in contact see

Z C.5 Technical data safety
relay module – on page 350
NOTE!
Follow the mentioned torques in Z Figure 87 – on page 186 and in Z Figure 90 – on
page 189 to ensure an adequate conductivity.