Baumuller AIO Series Скачать руководство пользователя страница 73 | Manualshive

Страница: 73 / 84

Baumuller AIO Series Скачать руководство пользователя страница 73

73

Instruction handbook

b maXX

(BM4-F-)AIO-XX (Analog IO module)

Document No.: 5.01045.08

11

D

ISPOSAL

11.1 Safety notes

NOTE!

Baumüller products are not subject to the scope of application of the EU's Waste
Electrical and Electronic Equipment Directive (WEEE, 2002/96/EC). Hence,
Baumüller is not obligated to bear any costs for taking back and disposing of old de-
vices.

DANGER!

Risk of fatal injury from electrical current!

Stored electric charge.

Discharge time of the system = discharge time of the device with the longest DC link
discharge time in the DC link connection.

Refer to Instruction handbook

b maXX

BM4000

, Electrical data.

Therefore:

m

Do not touch before taking into account the discharge time of the capacitors and
electrically live parts.

m

Heed corresponding notes on the equipment.

m

If additional capacitors are connected to the DC link, the DC link discharge can
take a much longer time. In this case, the necessary waiting period must be deter-
mined or a measurement made as to whether the equipment is de-energized. This
discharge time must be posted, together with an IEC 60417-5036 (2002-10) warn-
ing symbol, on a clearly visible location of the control cabinet.

«
...
71
72
73
74
75
...
»

Содержание AIO Series





















































































Отзывы:

Нет отзывов