Baumuller AIO Series страница 32 Скачать руководство пользователя

Страница: 32 / 84

Unpacking

Instruction handbook

b maXX

(BM4-F-)AIO-XX (Analog IO module)

Document No.: 5.01045.08

Baumüller Nürnberg GmbH

of 82

5.3

Unpacking

After having received the still packaged device:

Avoid transport shocks and hard jolts, e.g. when putting an item down.

If no transport damage is visible:

Open the packaging of the device.

Verify the delivery scope based on the delivery note.

File a claim with the responsible Baumüller representative if the delivery is incomplete.

5.4

Disposal of the packaging

The packaging consists of cardboard, plastic, metal parts, corrugated cardboard and/or
wood.

When disposing of the packaging, comply with the national regulations.

NOTE!

Claim each individual deficiency as soon as it has been detected. Damage claims can
only be validly asserted within the claim registration period.

Содержание AIO Series





















































































Результаты поиска

Содержание AIO Series

Отзывы:

Похожие инструкции для AIO Series

Бренды по названию

Популярные бренды

Baumuller AIO Series, Инструкция по эксплуатации

Результаты поиска

Содержание AIO Series

Отзывы:

Похожие инструкции для AIO Series

Бренды по названию

Популярные бренды