Baumuller AIO Series Скачать руководство пользователя страница 25

Страница: 25 / 84

Design and Operation

Instruction handbook

b maXX

(BM4-F-)AIO-XX (Analog IO module)

Document No.: 5.01045.08

of 82

4.2.2

Type plate BM4-F-AIO-XX for standard controller

The type plate can be found on the connector on the back side of the

BM4-F-AIO-XX

The type code and the serial No. are printed on the type plate.

Figure 3:

Type plate

BM4-F-AIO-XX

for standard controller

NOTE!

Only 2 analog outputs can be parametrized or linked even more than one AIO module
is plugged.

NOTE!

EtherCAT option modules

must not

be plugged in slot

of a 3-rowed controller unit,

because the module can be damaged.

In case another BM4X-X-XXX plug-in module is plugged in an unsuitable slot, it will
not operate. We have made sure, that neither the module nor the device are dam-
aged.

Type plate

e.g.

BM4-F-AIO-01

2 analog IN \ 2 analog OUT
S12345678

Содержание AIO Series





















































































Результаты поиска

Содержание AIO Series

Отзывы:

Baumuller AIO Series, Инструкция по эксплуатации, Страница: 25 / 84

Результаты поиска

Содержание AIO Series

Отзывы: