Petrol-Powered Chainsaw – SX62
22
3.
Sprockets
Check for cracks and for excessive wear that are interfering with the chain drive. If cracks and worn parts are
found, replace them with new ones. Never fit a new chain on a worn sprocket, or a worn chain on a new
sprocket.
(1) Sprocket
(2) Needle bearing
(3) Clutch drum
(4) Spacer
(5) Clutch shoe
4.
Fuel filter
Disassemble the filter and wash with gasoline, or replace it with a new one if necessary.
5.
Oil filter
Disassemble the filter and wash it with gasoline, or replace it with a new one if necessary.
6.
Front and rear dampers
Replace if any adhered part is peeled or if you see a crack on the rubber part.
Maintenance of Saw Chain and Guide Bar
Saw Chain
WARNING!
For a smooth and safe operation, it is very important to always keep the cutters sharp.
Your cutters need to be sharpened when:
•
Sawdust becomes powder-like.
•
You need extra force to saw in.
•
The cutting direction isn’t straight.
•
Vibration increases.
•
Fuel consumption increases.
