E&OE
© 2020 Baumr-AG
29
Unpacking & Preparing for Use
On receipt, carefully unpack the lathe and inspect to ensure that no damage was suffered in transit and all parts
are accounted for. Should any damage be apparent, or parts are missing, please contact your dealer
immediately.
The following loose items are to be found in the carton:
10. 4 x Rubber Feet *
11. 4 x M6 Pan Head Screws *
12. 4 x Hex Keys
13. 1 x Chuck Key
14. 1 x Plastic Oil Container *
15. 1 x Spare Fuse glass type *
16. 2 x Plastic Handles w/Nuts and Bolts *
17. No.2 Morse Taper Centre (for Tailstock)
18. 3 x External Jaws (for 3-Jaw Chuck)
19. 2 x Double Open-Ended Spanners 8x10mm and 14x17mm
20. 1 x Gear Set
Imperial - Z: 30, 35, 40, 40, 45, 50, 55, 57, 60, 65
Metric - Z.30, 35, 40, 40, 50, 60) *
* denotes not illustrated.
With assistance, considering the weight of the machine, raise it onto a good solid surface or workbench.
Proceed to remove all traces of preservative with paraffin or good quality solvent and lightly oil all machined
surfaces.
You will notice that, for transit purposes, the cross-slide feed handle has been mounted in reverse. Remove it,
by unscrewing the hex socket head screw, securing it, and mount it the correct way around. Then turn all feed
handles to ensure they are free and move evenly and smoothly.
