Baumer OM70 Скачать руководство пользователя страница 15

Страница: 15 / 60

en_BA_OM70_multi-spot.docx

15/60

Baumer Electric AG

04.01.2021 14:26/tof V1.2 ANW_81156398

Frauenfeld, Switzerland

Configuration

5.1

Overview of control elements

5.1.1

Display modes

Run mode

The sensor is in run mode, the measuring value is
displayed in large characters.

Main menu

In the main menu the active mode is displayed at the top,
and the measuring value is displayed at the bottom.

Scroll bar

The square on the right side indicates the position within
the current menu. The next menu item can be accessed
using the arrow keys.

Change value

If the function/mode at the top is displayed on a black
background, the value of the bottom line can be adjusted
using the UP/DOWN keys and saved with SET.

Process successful

The display background lights up green: Value
successfully saved

Error

The display background lights up red: Error during the
save process or wrong value entered.

Setting mode

When the sensor is in setting mode the display
background lights up blue.

Keys locked

If this symbol is on the left side of the screen, the touch
panel is locked for operation.

112.42 mm

AVG DIST
112.42 mm

  MEAS TYPE
  AVG DIST


  AVG DIST

112.42 mm

Graphical display

LEDs

Touch panel: Four
touch-sensitive keys

ESC

DOWN

SET

Avg DIST
112.42 mm

MEAS TYPE

Содержание OM70





























































Результаты поиска

Содержание OM70

Отзывы:

Бренды по названию

Популярные бренды

Baumer OM70, Руководство по эксплуатации

Результаты поиска

Содержание OM70

Отзывы:

Бренды по названию

Популярные бренды