4
Montage
/ Mounting
17
Baumer_LWL-SBR-SHR-EHR_II_DE-EN (19A1)
MB199 - 11136561
7
Technical data
7
Technical data
7.1
Technical data - electrical ratings
Fiber-optic transmitter: LWL-SHR
•
Voltage supply:
9...30 VDC
•
Consumption:
≤300 mA
•
Start time:
<500 ms
•
Inputs:
HTL, TTL
•
Input signals:
K1, K1, K2, K2, K0, K0, Err, Err
•
Wave length:
~820 nm
•
Transmission length.
≤1500 m
•
Outputs:
Fiber1, Fiber2
Fiber-optic receiver: LWL-EHR
•
Voltage supply:
9...30 VDC
•
Consumption:
≤300 mA
•
Start time:
<500 ms
•
Inputs:
2x fiber-optic, 2x error, acknowledgement (Ack)
•
Input signals:
Fiber1, Fiber2, Ack1, Ack2
•
Input level:
Ack >2.5 V
•
Wave length:
~820 nm
•
Transmission length:
≤1500 m
•
Outputs:
HTL (power linedriver); TTL (RS422)
•
Output signals:
K1, K1, K2, K2, K0, K0, Err, Err
Status S1, status S2, sum, status (SSum)
•
Output frequency:
≤300 kHz (HTL); ≤1 MHz (TTL)
•
Output level:
HTL: LOW: ≤0,2 UB; HIGH: ≥0,8 UB
TTL: LOW: ≤0,7 V; HIGH: ≥3 V
•
Status output:
S1, S2 (configurable)
•
LED operating status:
1x power LED (green)
1x overload LED (red)
1x status LED (green) each channel
1x error LED (red) each channel
1x link LED (green) each channel
7.2
Technical data - mechanical design
Fiber-optic transmitter: LWL-SHR, Fiber-optic receiver: LWL-EHR
•
Dimensions W x H x L:
100 x 75 x 53 mm
•
Protection DIN EN 60529:
IP20
•
Operating temperature:
-20...+70 °C (without dew)
•
Connection:
Screw terminal connector, 2x ST connector
•
Housing type:
Mounting on standard rails acc. to EN 50022
Fiber-optic transmitter in outdoor box: LWL-SBR
•
Dimensions W x H x L:
122 x 81 x 220 mm
•
Protection DIN EN 60529:
IP66/IP67
•
Ambient temperature:
-40...+85 °C
•
Weight approx.:
300 g
•
Connection:
1x cable gland M16x1.5/M20x1.5/M32x1.5 each
•
Material:
Housing: aluminium die-cast
