Baumer Hubner PMG10, Монтаж и эксплуатация

Страница: 16 / 36

ELECTRICAL CONNECTION / TERMINAL SIGNIFICANCE
13/29 MB245EN - 11171693, 19A3, Baumer_PMG10-SSI_II_EN
5.
ELECTRICAL CONNECTION
5.1 Terminal significance
Ub Voltage supply
0V Ground
A+
1)
Output signal channel 1
A−
1)
Output signal channel 1 inverted
B+
1)
Output signal channel 2 (offset by 90° to channel 1)
B−
1)
Output signal channel 2 inverted
R+
1)
Zero pulse (reference signal)
R−
1)
Zero pulse inverted
nE+ System OK+ / error output
nE− System OK− / error output inverted
PRE RESET (see also
section 5.2.2 )
DIR Rotating direction (see also section 5.2.3 )
SP+
2)
DSL_OUT1 / speed switch (open collector* or solid state relay*)
SP−
2)
DSL_OUT2 / speed switch (0V* or solid state relay*)
SA
3)
RS485+ / programming interface
SB
3)
RS485− / programming interface
D+ SSI data+
D− SSI data−
C+
SSI clock+
C− SSI clock−
dnu Do not use
* Depending on version
1)
Additional output incremental (option)
2)
Speed switch (option)
3)
Programming interface (only PMG10P)