Baumer HUBNER BERLIN PROFI NET microGen HMG10P, Руководство по эксплуатации

Страница: 9 / 44

Baumer Hübner Description | 4
V1, T1 | HMG10 & HMG10P EtherNet/IP Operating Manual 9
4 Description
4.1 Rotary encoder
1 2 5 6
18
17
16
12 13 14 15
3
10
8 9 7 4
11
Ill. 1: Description HMG10
1 Hexagon head screw M6x18 mm (ISO
4017) 2 Washer B6.4 (ISO 7090)
3 Self-locking nut M6 (ISO 10511) 4 Torx screw M4x10 mm, TX20 (ISO
14583)
5 Torque plate 360°, attachable in any posi-
tion 6 Housing
7 Blind hollow shaft or cone shaft with
wrench flat SW 17 mm 8 Cover
9 Torx/slotted head screw M4x10 mm (DIN
7964) 10 LED activity indicator
11 Through hollow shaft 12 Bus terminal box EtherNet/IP
13 Torx screw M3x12 mm (ISO 7045) 14 Clamping ring
15 Blind cover (device without additional out-
put, without speed switch and without
programming interface) 16 Grounding strap, length approx. 230 mm
17 Additional incremental output (optional),
speed switch (optional), programming in-
terface (only HMG10P) 18 Clamping element, not for cone shaft