Baumer HUBNER BERLIN PROFI NET microGen HMG10P, Руководство по эксплуатации

Страница: 36 / 44

7 | Disassembly Baumer Hübner
36 Operating Manual HMG10 & HMG10P EtherNet/IP | V1, T1
Tool
n
5 mm
n
1,6×8 mm
n
10 mm, 17 mm
n
20 mm
Instruction:
a) Disconnect the electrical connection to the encoder using the plug-in terminal boxes and
contacts.
b) Remove the cover at rear.
c) Unscrew the cheese-head screw and secure at the hollow shaft using a wrench.
d) Loosen the self-locking nut on the torque arm.
e) Loosen the cheese-head screw at ground strap.
7.1.2 Threaded pin to secure at blind hollow shaft
1
1 Threaded pin M6x10 mm (ISO 7436)
Tool
n
0,8×4 mm
Instruction:
w
Flush attachment of the threaded pin will protect the inside thread of the drive shaft.