IMPORTANT NOTES
MB252EN - 11173969, 16A1, Baumer_HMG10-DeviceNet_II_EN
2/33
1.4
Maintenance and lifetime
The encoder may be only opened as described in this instruction� Repair or maintenance
work that requires opening the encoder completely must be carried out by the manufactu-
rer�
Alterations of the device are not permitted�
The expected operating life of the device depends on the ball bearings, which are equipped
with a permanent lubrication�
In the event of queries or subsequent deliveries, the data on the device type label must be
quoted, especially the type designation and the serial number�
1.5
Approvals and warranty
EU Declaration of Conformity meeting to the European Directives�
UL approval / E256710�
We grant a 2-year warranty in accordance with the regulations of the Central Association of
the German Electrical Industry (ZVEI)�
i
Warranty seal
Damaging the warranty seal on the encoder invalidates warranty�
1.6
Storage temperature and disposal
The storage temperature range of the encoder is between -15���+70 °C (caused by pa-
cking)�
Encoder components are to be disposed of according to the regulations prevailing in the
respective country�