ELECTRICAL CONNECTION / DEVICENET
13/33
MB252EN - 11173969, 16A1, Baumer_HMG10-DeviceNet_II_EN
5.
ELECTRICAL CONNECTION
5.1
DeviceNet
i
Please ind a detailed instruction for the DeviceNet interface and the device descrip
-
tion ile in the manual on the CD provided with the device.
5.1.1
Features
Bus protocol
DeviceNet
Device proile
Device Proil for Encoders V 1.0
Operating modes
I/O-Polling
Cyclic
Change of State
Preset value
The „Preset“ parameter can be used to set the encoder
to a predeined value that corresponds to a speciic axis
position of the system�
The offset of encoder zero point and mechanical zero
point is stored in the encoder�
Parameter functions
Rotating direction:
The relationship between the rotating direction and
rising or falling output code values can be set in the
operating parameter�
Scaling:
The parameter values set the number of steps per turn
and the overall resolution�
Diagnostic
The encoder supports the following error warnings:
- Position and parameter error
Default settings
User address 00