Baumer HUBNER BERLIN DeviceNet HMG 10, Монтаж и эксплуатация

Страница: 13 / 36

≥ ød
>113 mm
ød
ød (mm)
16
h6
20
h6
10c 10b
10a
5
10c
10e
10d
10b 10b
10c
9
8c 8b
MOUNTING / MOUNTING TO DRIVE SHAFT
MB252EN - 11173969, 16A1, Baumer_HMG10-DeviceNet_II_EN
10/33
4.3.3 Version with through hollow shaft
)
Lifetime restrictions and angle error by radial deviations
High runout of the drive shaft can cause encoder angle error, see
section 4.5,
page 12 �
High runout of the drive shaft can cause vibrations, which can shorten the lifeti-
me of the encoder�
» Lubricate drive shaft!
)
Minimize drive shaft runout (≤0.2 mm; ≤0.03 mm recommended).
Loosen the screw
Tighten the screw
Mt = 2-3 Nm
i
The encoder must be mounted with cable connection facing downward and not
exposed to water�
TX 10
1�6x8 mm 10 mm