10c
10b
10a
5
10e
10d
10c 10b
10b
10c
9
11b
11a
7a
3
2
Mt = 3-4 Nm
TX 20
17 mm
5 mm
10 mm
1�6x8 mm
MOUNTING / MOUNTING TO DRIVE SHAFT
9/33
MB252EN - 11173969, 16A1, Baumer_HMG10-DeviceNet_II_EN
4.3.2
Version with cone shaft
)
Lifetime restrictions and angle error by radial deviations
High runout of the drive shaft can cause encoder angle error, see
High runout of the drive shaft can cause vibrations, which can shorten the lifeti-
me of the encoder�
» Lubricate drive shaft!
)
Minimize drive shaft runout (≤0.2 mm; ≤0.03 mm recommended).
i
The encoder must be mounted with cable connection facing downward and not
exposed to water�