Baumer hhs ULT 400 XL, Руководство по эксплуатации, Страница: 27 / 53

No. LED Description
1 GLUE Status indicator for adhesive moni-
toring
2 OBJECT Status indicator for product detec-
tion
n On : There is a product under
the sensor.
n Off : There is no product under
the sensor.
3 READY Status indicator for the sensor
n On : The sensor is now ready
for operation.
n Off : The sensor is not ready
for operation.
The status indicator for the sensor shows the status of the sensor
with the 3 LEDs.
A distinction is made between the following operating modes:
n Regular operation
Ä “Regular operation” on page 28
n Fault
Ä “Fault” on page 28
n Programming
Ä
“Programming” on page 29
n Automatic programming
Ä
“Automatic programming (3 products with adhesive applica-
tion)” on page 29
The sensors have different electronics and software.
These versions differ due to the requirements for adhe-
sive monitoring. Depending on the application and the
configuration, settings may differ or may not be avail-
able.
The basic operation remains the same.
Status indicator
Layout and functional description
Function > Sensor ULT 400 XL
04.05.2021 ULT 400 XL 27